Our unmanaged industrial ethernet switch provides 2 uplink redundant 100Mbit/s optic ports. The uplink redundant fiber optic interface can be used to build a self-healing fiber optic ring network. When the system fails, the time of redundancy reversal is less than 300ms and the reliability of the system is thus improved. It also provides two power ports 100 Mbit/s to build a self-healing power port. When the system re-configures, the time of redundancy reversal is less than 300ms. Due to its self-adaptability, each of the four 10/100Base-T twisted-pair ports can automatically set up to 10BASE-TX state or 100BASE-TX state as well as full or half duplex operation mode. The starting time for this function can be reduced by connecting the equipment through the plug and play mode. 24V power supply redundancy is provided to improve the reliability of the network and the system. Our unmanaged industrial ethernet switch has a WEB-based on network management system. These functions facilitate the simple and easy establishment and installation of our unmanaged industrial ethernet switch. A +24V power supply is used for powering the system and the redundancy mode can also be set up.
Equipment Parameters 2 100Mbit/S fiber ports, supporting automatic negotiation of optic port 6 100Base-TX power ports, with RJ-45 shield and supporting automatic negotiation and automatic polar identification. It is in line with Standard IEEE802.3. System transmission distance: For multi-mode port with greater than 8 dBm, transmission distance: 5 KM; For single mode port with greater than 8dBm, transmission distance: 30 KM. System redundancy switch duration: Not greater 500ms System store and forward rate: 148810 PPS MAC address table: 8K Power supply: +24VDC System power consumption: Less than 5W EMC complies with GB 9254-1998 IP30 protective grade, aluminum housing. DIN rail mount Application: - Remote network connection - Factory automatization - SCADA/DCS system - Power grid distribution automatization - Transformer station system automatization - Mining sites in bad environment - National defiance/military industry/train/warship carrying equipments
Order information ---2 redundant 100Mbit/s single mode fiber ports 2 100Mbit/s power ports with RJ-45 shield that can build a redundant ring network. 4 10/100Base-T power ports with RJ-45 shield that is in line with Standard IEEE802.3.
---2 redundant 100Mbit/s multi-mode fiber ports 2 100Mbit/s power ports with RJ-45 shield that can build a redundant ring network. 4 10/100Base-T power ports with RJ-45 shield that is in line with Standard IEEE802.3.